12
1
2
HIGHLOW
2
3
NOTE: Use the speed selector to adjust the
speed from high to low.
2. Push the lock-out trigger and squeeze the
variable speed trigger to operate the product.
3. Tap the bump knob on the ground to
advance the line. The line advances each
time that the head is tapped. Do not hold the
bump knob onto the ground.
NOTE: Tap the bump knob only on grass to
prevent damage to the bump knob.
NOTE: The small blade fitted to the cutting
attachment guard is designed to trim the newly
extended line to the correct length for safe
and optimum performance. The blade is very
sharp. Do not touch the blade, particularly when
cleaning the product.
To Next Page
