16
12cm12 cm12cm12 cm
2
3
1
5
6
NOTE: Wind the line until approximately 12 cm
remains protruding from the trimmer head.
5. Insert the battery pack until the battery latch
button clicks into place. Push the lock-out
trigger and squeeze the variable speed
trigger to operate the product.
6. Tap the bump knob on the ground to
advance the line. The line advances each
time that the head is tapped. Do not hold the
knob onto the ground.
NOTE: Only tap the bump knob onto grass
as bumping it onto a hard surface will
damage the trimmer head.
NOTE: The small blade tted to the cutting
attachment guard is designed to trim the newly
extended line to the correct length for safe
and optimum performance. The blade is very
sharp. Do not touch the blade, particularly when
cleaning the product.
To Next Page
