Ryobi RLT36BL - Getting Started and Assembly; Personal Protective Equipment and Handle Installation; Shaft Assembly and Battery Insertion; Product Operation Initiation

8
GETTING STARTED
1
2
3
1 2
1
2
6
5
Always wear safety goggles or safety glasses with side shields
when operating the product. Wear non-slip, heavy-duty protective
gloves. Wear non-skid, protective footwear that will protect your
feet and improve your footing on slippery surfaces.
Insert the battery pack until the battery latch button clicks into
place.
Push the lock-out trigger and squeeze the variable speed trigger
to operate the product.
Install the front handle to the upper shaft. Tighten the knob to
secure.