Need help?Do you have a question about the Ryobi RLT36BL and is the answer not in the manual?
General| Battery Voltage | 36 V |
|---|---|
| Battery Included | Yes |
| Charger Included | Yes |
| Type | String Trimmer |
| Line Diameter | 0.095 inches |
| Handle Type | Loop Handle |
| Power Source | Battery |
Defines the trimmer's purpose for cutting grass and specifies limitations on use with hedges or non-parallel surfaces.
Emphasizes reading instructions, following safety rules, operator responsibility, child supervision, and training.
Details wearing safety goggles, hearing protection, heavy clothing, protective footwear, and safe operating environment.
Covers pre-operation checks, guards, battery charging, and safe battery handling to prevent hazards.
Covers two-handed operation, avoiding wet grass, maintaining balance, and keeping the head low.
Covers cooling down, cleaning, and storing the product in a cool, dry place away from corrosive agents.
Follows regulations for packaging and labelling batteries during transport, securing connectors.
Emphasizes using original parts and requiring servicing by an authorized service centre.
Describes risks from vibration, noise, and flying debris, and advises on protection measures like PPE and breaks.
Lists included components and explains common safety symbols found on the product.
Explains symbols used within the manual, such as for parts sold separately, notes, and warnings.
Identifies and labels all key parts of the cordless line trimmer using a diagram.
Details wearing PPE and installing the front handle to the upper shaft securely.
Covers inserting the lower shaft into the upper shaft and inserting the battery pack until it clicks.
Explains how to initiate product operation by pushing the lock-out trigger and squeezing the variable speed trigger.
Emphasizes two-handed operation, avoiding thrown objects, and keeping hands/feet away from cutting means.
Explains using the speed selector and tapping the bump knob to advance the line while operating.
Advises cutting tall grass from top-down and from right to left for ease and safety.
Details loosening screws, rotating line cut-off blades, and installing them to change the cutting width.
Describes cutting, inserting, and winding the cutting line using the bump knob and spool.
Explains proper line winding technique and advancing the line by tapping the bump knob.
Details removing the old trimmer head and installing a new one using a holding pin for secure attachment.
Advises cleaning the product with a soft, dry brush and keeping it away from corrosive agents.
Covers cleaning, disassembling the shaft, and storing the product in a cool, dry, well-ventilated place.
Provides detailed specifications including model, speed, capacity, weight, vibration, and noise emission levels.
Lists compatible battery packs, chargers, and replacement parts for the models.
To Next Page
