Ryobi RLT36BL - Speed Adjustment and Line Advancement

12
OPERATION
1
2
HIGHLOW
2
3
NOTE: Use the speed selector to adjust the
speed from high to low.
2. Push the lock-out trigger and squeeze the
variable speed trigger to operate the product.
3. To advance the line, tap the knob on the
ground until it reaches its full speed. The line
advances each time the head is tapped. Do
not hold the bump knob on the ground.
NOTE: Tap the bump knob only on the grass
to prevent damage to the bump knob.
NOTE: The line trimming cut-off blade on the
grass deflector cuts the line to the correct length.