Ryobi RS290G User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
RANDOM ORBIT SANDER
DOUBLE INSULATED
PONCEUSE À ORBITE
ALÉATOIRE
DOUBLE ISOLATION
LIJADORA ORBITAL
ALEATORIA
DOBLE AISLAMIENTO
RS290 / RS290G
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
 General Power Tool Safety
Warnings .........................................2-3
 Sander Safety Warnings .....................4
 Symbols ..............................................5
 Electrical ............................................. 6
 Features ..............................................7
 Assembly ............................................ 7
 Operation .........................................7-9
 Maintenance ....................................... 9
 Figure Numbers (Illustrations) ......10-11
 Parts Ordering / Service ..... Back Page
TABLE DES MATIÈRES
****************
 Règles de sécurité relatives
aux outils électriques ......................2-3
 Avertissements de sécurité relatifs
au ponceuse ......................................4
Symboles ............................................5
 Caractéristiques électriques ...............6
 Caractéristiques .................................7
 Assemblage ........................................7
 Utilisation .........................................7-9
 Entretien .............................................9
 Figure numéros (illustrations) ......10-11
 Commande de pièces /
réparation ..........................Page arrière
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad
para herramientas eléctricas ...........2-3
Advertencias de seguridad
lijadora ...............................................4
Símbolos ............................................5
Aspectos eléctricos ............................ 6
Características ...................................7
Armado ...............................................7
Funcionamiento ...............................7-9
Mantenimiento ....................................9
 Figura numeras (ilustraciones) ....10-11
Pedidos de piezas /
servicio .......................... Pág. posterior

Ryobi RS290G Specifications

General

Power Source	Corded
Amperage	2.6 Amps
Voltage	120 Volts
Dust Collection	Yes
Weight	3.5 lbs
Orbit Diameter	1/8 inch
Sanding Pad Size	5 inches
Grip Type	Palm
Amp Rating	2.6 Amps
Pad Size	5 inches

Summary

General Power Tool Safety Warnings

Work Area Safety

Guidelines for maintaining a safe and clear workspace during operation.

Electrical Safety

Precautions for safe use of electrical connections and cords.

Personal Safety

Essential personal protective measures and common sense for tool operation.

Power Tool Use and Care

Guidelines for proper application, handling, and maintenance of power tools.

Service Safety

Safety precautions related to tool servicing and repair procedures.

Sander Safety Warnings

Operational Safety Guidelines

Covers insulated grips, tool knowledge, eye, lung, and hearing protection.

Cord and Part Integrity

Guidelines for inspecting cords, checking damaged parts, and extension cord use.

California Proposition 65 Warning

Information on potential chemical exposure and associated health risks.

Symbols

Electrical Information

Double Insulation Explained

Explanation of the double insulation safety concept in electric power tools.

Extension Cord Usage

Recommendations for selecting and using appropriate extension cords.

Features and Specifications

Product Specifications

Key technical details and measurements for the sander.

Assembly

Operation

Applications and Disc Selection

Details intended uses and guidance on choosing the correct sanding discs.

Sander Setup and Dust Collection

Instructions for attaching discs, dust bags, or vacuum systems.

Operating Procedures

Steps for starting, using, and stopping the sander safely and effectively.

Maintenance

General Maintenance and Cleaning

Advice on cleaning plastic parts and general upkeep.

Lubrication and Cord Replacement

Information on lubrication requirements and power cord replacement.