To Next PageTo Next PageWhat to do if my Ryobi Sander polisher does not turn on?
If your Ryobi Sander polisher isn't turning on, first ensure the plug is properly inserted into the outlet. If you're using an extension cord, inspect its connection and wire gauge. If problems persist, it could be a motor issue.
Why is the bonnet surface creased on my Ryobi Sander?
If the bonnet surface of your Ryobi Sander is creased or wrinkled, leading to uneven application, the drawstring may be loose. To fix this, untie the drawstring and retighten it.
What to do if polishing seems difficult with Ryobi Sander?
If you're finding polishing difficult with your Ryobi Sander, the bonnet might be worn. Try replacing the bonnet.
How to fix uneven wax application with Ryobi Sander?
If the wax isn't going on evenly with your Ryobi Sander, it might be due to too much wax on the bonnet. Remove some of the wax and try again.
Covers extra safety measures, including knowing the tool and wearing protective gear.
Details on connecting the buffer/polisher to a 120V, 60Hz AC power supply.
Guidance on selecting and using appropriate extension cords for the tool.
Description of the reusable application bonnet made of synthetic tufted material.
Description of the reusable polishing bonnet made of 100% terry cloth.
Details about the 6-inch (152 mm) diameter foam pad.
Location and function of the buffer/polisher's on/off switch.
Information about the motor housing and its air vents.
Instructions for cleaning and preparing surfaces before polishing.
How to operate the ON/OFF switch to start and stop the tool.
Step-by-step guide for attaching the application bonnet to the pad.
Method for applying polish (paste or liquid) to the bonnet.
Specific instructions for applying paste polish to the bonnet.
Specific instructions for applying liquid polish to the bonnet.
Technique for applying polish to the actual surface using the tool.
Instructions on removing the application bonnet and attaching the buffing bonnet.
General
