To Next PageTo Next PageWhat to do if my Ryobi RB101 Sander polisher does not turn on?
If your Ryobi Sander polisher isn't turning on, first ensure the plug is properly seated in the outlet. If you're using an extension cord, check its connection and wire gauge. If the issue persists, it may be a motor problem, and you should call your authorized service center.
Why is the pad on my Ryobi RB101 spinning slower than normal?
If the pad on your Ryobi Sander spins slower than normal or not at all, it could be that the motor needs to be serviced or replaced. Contact your authorized service center for assistance.
Why is polishing with my Ryobi Sander so difficult?
If polishing with your Ryobi Sander seems difficult, the bonnet may be worn. Try replacing the bonnet.
How to fix a creased bonnet surface on my Ryobi RB101?
If the bonnet surface of your Ryobi Sander is creased or wrinkled, resulting in uneven application/buffing, the drawstring might be loose. Untie the drawstring and retighten it.
General| Dust Collection | Yes |
|---|---|
| Type | Random Orbit Sander |
| Power Source | Corded |
| Sanding Pad Size | 5 inches |
| No Load Speed | 12, 000 OPM |
| Orbit Diameter | 3/32 inches |
Details the policy for exchanging or servicing defective RYOBI® power tools within the first 30 days.
Specifies defects in workmanship or materials covered for a period of two years for tools, 90 days for accessories.
Provides instructions on how to obtain warranty service, including contact information and required documentation.
Excludes coverage for misuse, abuse, neglect, alteration, modification, or repairs by non-authorized centers.
Addresses implied warranties and limitations on liability for direct, indirect, or incidental damages.
Guidelines for maintaining a clean, well-lit work area and avoiding hazardous conditions.
Covers double insulation, grounding, avoiding wet conditions, and proper cord usage.
Emphasizes staying alert, proper dress, and avoiding distractions while operating tools.
Instructions on proper tool handling, maintenance, accessory use, and cleaning.
Covers safe gripping, knowing the tool, wearing safety glasses, and protecting lungs/hearing.
Details on inspecting cords, checking damaged parts, and ensuring proper extension cord usage.
Highlights that service must be performed by qualified personnel using identical replacement parts.
Explains the concept of double insulation and its safety implications for tools.
Details voltage, frequency, and current requirements for connecting the tool to a power supply.
Provides chart and advice on selecting appropriate gauge and type of extension cords.
Encourages understanding of the tool, manual, and project before operation.
Details on Application Bonnet, Cord, Foam Pad, Motor Housing, Switches, and Handles.
Steps for safely removing the tool and accessories from packaging and checking for damage.
Lists the items included in the product package for verification.
Guidance on cleaning and preparing surfaces for polishing, including product recommendations.
Lists the intended uses for the buffer/polisher, such as cars, boats, RVs, and furniture.
Step-by-step instructions for securely attaching the application bonnet to the pad using the drawstring.
Guidance on applying paste or liquid polish evenly to the application bonnet before use.
Instructions for applying liquid polish to the bonnet, including quantity and pattern.
Techniques for polishing surfaces with the tool, including motion and grip.
Procedure for removing the application bonnet and attaching the buffing bonnet.
Advice on cleaning plastic parts and avoiding solvents or harsh chemicals.
States that the tool's bearings are pre-lubricated for life and require no additional lubrication.
Instructions for hand or machine washing and drying reusable application and buffing bonnets.
Recommendations for pad maintenance, drying, storage, and avoiding saturation.
Guidance on cleaning the exterior and contacting service for internal component issues.
Instructions on contacting an Authorized Service Center for repair parts or service.
Guidance on locating and recording the tool's model and serial numbers.
Details required information, such as model and serial number, when ordering replacement parts.
