To Next PageTo Next PageWhat to do if my Ryobi RB101 Sander polisher does not turn on?
If your Ryobi Sander polisher isn't turning on, first ensure the plug is properly seated in the outlet. If you're using an extension cord, check its connection and wire gauge. If the issue persists, it may be a motor problem, and you should call your authorized service center.
Why is the pad on my Ryobi RB101 spinning slower than normal?
If the pad on your Ryobi Sander spins slower than normal or not at all, it could be that the motor needs to be serviced or replaced. Contact your authorized service center for assistance.
Why is polishing with my Ryobi Sander so difficult?
If polishing with your Ryobi Sander seems difficult, the bonnet may be worn. Try replacing the bonnet.
How to fix a creased bonnet surface on my Ryobi RB101?
If the bonnet surface of your Ryobi Sander is creased or wrinkled, resulting in uneven application/buffing, the drawstring might be loose. Untie the drawstring and retighten it.
General| Dust Collection | Yes |
|---|---|
| Type | Random Orbit Sander |
| Power Source | Corded |
| Sanding Pad Size | 5 inches |
| No Load Speed | 12, 000 OPM |
| Orbit Diameter | 3/32 inches |
