Ryobi RY18BCX26A-0 - User Manual

Need help?

Do you have a question about the Ryobi RY18BCX26A-0 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

The RY18BCX26A is a cordless brush cutter, line trimmer, and brush saw designed with a focus on safety, performance, and dependability. This versatile tool offers three distinct modes of operation to tackle various outdoor tasks.

Function Description:

The device operates in three modes:

Line Trimmer: Utilizes a line trimmer head for cutting grass and light vegetation.
Brush Cutter: Employs a TRI-ARC blade for cutting bushes.
Brush Saw: Uses a saw blade for cutting stumps and branches. The cutting plane for all modes should be approximately parallel to the ground surface. It is intended for outdoor use in well-ventilated areas and requires two-handed operation for proper control and safety. The product is designed for adults who have read and understood the manual's instructions and warnings.

Important Technical Specifications:

Model: RY18BCX26A
Voltage: 18 V d.c.
Maximum shaft speed: 6,000 / min
Brushcutter:
- Weight: 4.5 kg
- No-load speed: 5,800 / min
- Blade diameter: 260 mm
- Vibration level (according to IEC 62841-4-4): Left handle 0.77 m/s², Right handle 2.00 m/s²
- Noise emission level (according to IEC 62841-4-4): A-weighted sound pressure level at operator’s position 80.50 dB(A), A-weighted sound power level 92.55 dB(A)
- Uncertainty (vibration): 1.5 m/s²
- Uncertainty (noise): 3.0 dB
- Guaranteed sound power level: 94 dB
Line Trimmer:
- Weight: 4.75 kg
- No-load speed: 5,600 / min
- Cutting capacity: 380 mm
- Cutting line diameter: 2.4 mm
- Vibration level (according to IEC 62841-4-4): Left handle 2.49 m/s², Right handle 4.09 m/s²
- Noise emission level (according to IEC 62841-4-4): A-weighted sound pressure level at operator’s position 86.20 dB(A), A-weighted sound power level 96.73 dB(A)
- Uncertainty (vibration): 1.5 m/s²
- Uncertainty (noise): 3.0 dB
- Guaranteed sound power level: 96 dB
Brush Saw:
- Weight: 5.0 kg
- No-load speed: 5,800 / min
- Saw blade diameter: 254 mm
- Vibration level (according to IEC 62841-4-4): Left handle 0.85 m/s², Right handle 2.1 m/s²
- Noise emission level (according to IEC 62841-4-4): A-weighted sound pressure level at operator’s position 86.20 dB(A), A-weighted sound power level 96.73 dB(A)
- Uncertainty (vibration): 1.5 m/s²
- Uncertainty (noise): 3.0 dB
- Guaranteed sound power level: 98 dB

Usage Features:

The RY18BCX26A is equipped with a speed selector, bike handle, and an On/Off trigger for easy control. It features a harness hanger and a coupler for attaching different lower drive shafts. The bump knob on the line trimmer head allows for easy line advancement. The safety guard includes a cut-off blade to maintain the correct line length. The TRI-ARC blade and saw blade come with blade protectors for safe storage and transport. The product is powered by a battery pack and charged with a dedicated charger. For safe and effective cutting, approach weeds from right to left. When cutting brush or saplings under tension, be alert for spring back. Never cut material over 13 mm diameter with the TRI-ARC blade or over 40 mm diameter with the saw blade. Always maintain good visibility of the material being cut.

Maintenance Features:

Maintenance should be performed by qualified service personnel using only original replacement parts, accessories, and attachments. Before any maintenance or cleaning, the product must be turned off and the battery pack removed. After each use, clean the product with a soft, dry cloth. Regularly check all nuts, bolts, and screws for proper tightness. Damaged parts should be repaired or replaced by an authorized service center. The cutting line should only be replaced with nylon filament line of the diameter specified in the manual. Damaged blades must be replaced, ensuring they are correctly and securely fastened before each use. The product should be stored in a cool, dry, and well-ventilated area, inaccessible to children, and away from corrosive agents. For transportation, the product should be secured against movement or falling. Lithium batteries must be transported in accordance with local and national regulations, with exposed connectors protected.