I
iowensJul 31, 2025
Why does my Ryobi RY40108 Lawn Mower motor stop while cutting?
- KKaren BarnesAug 1, 2025
The motor of your Ryobi Lawn Mower might stop while cutting if the cutting height is set too low. Try raising the cutting height.
To Next PageTo Next PageWhy does my Ryobi RY40108 Lawn Mower motor stop while cutting?
The motor of your Ryobi Lawn Mower might stop while cutting if the cutting height is set too low. Try raising the cutting height.
Why is my Ryobi RY40108 not starting?
If your Ryobi Lawn Mower isn't starting, the battery might be low, the start key might not be installed, or the handle assembly might not be in the operating position. Charge the battery, install the start key, and raise the lower and upper handle.
What to do if Ryobi RY40108 Lawn Mower is not bagging properly?
If your Ryobi Lawn Mower is not bagging properly, the cutting height might be set too low. Raise the cutting height.
How to fix Ryobi Lawn Mower cutting grass unevenly?
If your Ryobi Lawn Mower is cutting grass unevenly, the lawn may be rough, or the cutting height may not be set properly. Adjust the cutting height.
What to do if Ryobi RY40108 Lawn Mower is not mulching properly?
If your Ryobi Lawn Mower is not mulching properly, wet grass clippings might be sticking to the underside of the deck. Wait until the grass dries before mowing.
Why is my Ryobi Lawn Mower vibrating at a higher speed?
If your Ryobi Lawn Mower vibrates at high speed, the blade may be unbalanced, excessively or unevenly worn, or the motor shaft could be bent. Replace the blade. Stop the motor, remove the start key and battery. Inspect for damage and have it repaired by an authorized service center before restarting.
What to do if Ryobi RY40108 Lawn Mower is hard to push?
If your Ryobi Lawn Mower is hard to push, it could be due to high grass, the rear of the mower housing and blade dragging in heavy grass, or the cutting height being too low. Raise the cutting height.
General| Brand | Ryobi |
|---|---|
| Model | RY40108 |
| Category | Lawn Mower |
| Language | English |
Explains the levels of risk associated with signal words like DANGER, WARNING, CAUTION, NOTICE.
Explains symbols used on the product for safety and operation, including Safety Alert, Eye Protection, etc.
Details technical specifications like motor, deck size, height adjustments, and wheel size.
Emphasizes understanding the product and manual for safe operation.
Describes essential parts like Battery Cover, Start Key, Grass Catcher, Mulching Plug, and controls.
Instructions for unpacking the product and verifying all parts are present.
Steps for unfolding and adjusting the mower's handle assembly for use.
Guide for installing the mulching plug for mulching operation.
Steps for assembling and attaching the grass catcher bag and frame.
Guide for installing the grass catcher for rear bagging operation.
Instructions on how to adjust the cutting height of the mower.
Steps for installing and removing the battery pack from the mower.
Instructions on how to start and stop the lawn mower using the start key and button.
Advice on best practices for mowing, including clearing the area and cutting height.
Safety precautions and guidelines for operating the mower on slopes.
Procedure for safely removing and emptying the grass clippings.
Warnings and notices regarding cleaning, liquids, and general care.
Information regarding the lubrication of the product's bearings.
Detailed steps for safely replacing the lawn mower blade.
Instructions for properly storing the mower indoors and its positions.
A table listing common issues like 'Mower not starting' and their possible causes and solutions.
Information on how to purchase replacement parts online or by phone.
Guidance on finding authorized service centers.
Contact information for customer and technical support.
