Why Ryobi Lawn Mower won’t reach full speed?
If your Ryobi Lawn Mower won’t reach full speed: * Ensure the battery is fully charged. * Check if the low speed drive feature is engaged and turn it off.
Why Ryobi RY48ZTR100 Lawn Mower blades do not rotate while moving in reverse?
If the blades on your Ryobi Lawn Mower do not rotate while moving in reverse, ensure that the blade engage knob is raised.
What to do if Ryobi Lawn Mower blades continue to turn after operator leaves seat without parking brake set?
If the blades on your Ryobi Lawn Mower continue to turn after you leave the seat without setting the parking brake, it indicates that the safety interlock system is not functioning correctly. Ensure the safety interlock system seat plug is fully connected. If the blades still won’t stop, take the mower to an authorized service center for repair.
Why Ryobi Lawn Mower headlights are not working?
If the headlights on your Ryobi Lawn Mower are not working: * Ensure the headlights are turned on by pressing the headlight button. * If they still don't work, the headlights may be damaged and need to be replaced at an authorized service center.
What does Charge Enable Fault mean for Ryobi RY48ZTR100?
A Charge Enable Fault on your Ryobi Lawn Mower may indicate poor contact at the charger connector or that the battery temperature is too high (greater than 122°F). Check the charger/mower connection and remove any debris. Allow hot batteries to cool, then try charging again.
General| Type | Zero Turn Mower |
|---|---|
| Motor | Brushless |
| Voltage | 48V |
| Speed | 8 mph |
| Deck Material | Steel |
| Drive System | Hydrostatic |
| Battery Type | Lithium-Ion |
| Number of Motors | 2 |
| Cutting Height | 1.5 - 4.5 in. |
| Warranty | 5 years |
To Next Page
