Ryobi RYi1802B6 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
40 VOLT POWER STATION
BLOC D’ALIMENTATION DE 40 V
ESTACIÓN ELÉCTRICA
DE 40 VOLTIOS
RYi1802B6/RYi1802BT
NEUTRAL FLOATING
FLOTTANTE NEUTRE / NEUTRAL DE FLOTACIÓN
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
TABLE OF CONTENTS
 Important Safety Instructions ..............2

Specific Safety Rules ..........................3

Safety Rules For Charger .................... 4

Symbols ..............................................5

Electrical ......................................... 6-7

Features ..............................................8

Assembly ............................................9

Operation ...................................... 9-12

Maintenance .....................................13

Troubleshooting ................................13

Parts Ordering/Service ........ Back Page
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation
avant d’employer ce produit.
TABLE DES MATIÈRES
 Instructions importantes
concernant la sécurité
........................2

Règles de sécurité particulières ..........3

Règles de sécurité concernant
le chargeur ...................................... 4-5

Symboles ............................................6

Caractéristiques électriques ........... 7-8

Caractéristiques ..................................9

Assemblage ......................................10

Utilisation .................................... 10-13

Entretien ............................................14

Dépannage ........................................ 14

Commande de pièces /
réparation
.......................... Páge arrière
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe
leer y comprender el manual del
operador antes de usar este producto.
ÍNDICE DE CONTENIDO
 Instrucciones de seguridad
importantes
.........................................2

Reglas de seguridad específicas ........3

Reglas de seguridad para
el empleo del cargador ................... 4-5

Símbolos .............................................6

Aspectos eléctricos ........................ 7-8

Características ....................................9

Armado .............................................10

Funcionamiento .......................... 10-13

Mantenimiento ..................................14

Corrección de problemas .................14

Pedidos de piezas/
servicio
........................... Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Ryobi RYi1802B6 Specifications

General

Fuel Type	Gasoline
Runtime at 50% Load	10 hours
Voltage	120V
Displacement	79 cc
Starting System	Recoil
Maximum AC Output	1800W
Frequency	60 Hz
Noise Level	58 dBA
Type	Inverter
Starting Watts	1800 watts
Running Watts	1600 watts
Engine Type	4-Stroke
Rated AC Output	1600 watts
Dry Weight	51 lbs

Summary

Important Safety Instructions

Bluetooth License Statement

Specific Safety Rules

Safety Rules for Charger

Symbols

Electrical

Extension Cord Cable Size

Table detailing maximum allowable cord lengths based on wire gauge and current.

Electric Motor Loads

Estimates starting watts for electric motors and provides running watts.

Product Capacity

Power Management

Charge/Runtime Capability

Features

Product Specifications

Details technical specifications including power source, output ratings, and operating temperature.

Know Your Product

Overview to understand product features and safety rules before operation.

Product Controls and Ports

Details on AC receptacles, USB ports, power buttons, and carry handle.

Advanced Features

Information on GENCONTROL, Bluetooth, LED task light, and parallel kit terminals.

Assembly

Unpacking and Packing List

Instructions for removing the product from the box and verifying contents.

Operation

Installing/Removing Battery Packs

Steps for inserting and removing battery packs from the power station.

Charging the Power Station

Procedure for connecting the charger and charging the power station's batteries.

Battery Port LED Functions

Explanation of LED indicators for battery status during charging and testing.

Operation

Generator Condition Notifications

Explains LCD display messages for temperature and voltage issues and their resolutions.

Using the Power Station

Instructions for powering the unit on, using AC outlets, and managing sleep/auto-off modes.

Operation

GENCONTROL™ LCD Display

Details on the LCD display for battery, load, run time, and charging status.

USB Charging Ports

Information on using USB-A and USB-C ports for charging compatible devices.

LED Task Light and Bluetooth

Guidance on operating the LED task light and pairing the product via Bluetooth.

Protective Cover Usage

Guidance on using the protective cover for storage and protection.

Maintenance

General Maintenance and Storage

Advice on cleaning the unit and proper storage procedures.

Troubleshooting

Troubleshooting Guide

Common problems, their possible causes, and solutions for the power station.

FCC Compliance

Supplier's Declaration of Conformity

Statement of compliance with FCC rules and Industry Canada standards.

Parts and Service

Obtaining Parts and Service

Instructions on how to purchase replacement parts and locate service centers.