To Next PageTo Next PageWhy does my Ryobi RYi2300BT Portable Generator engine lack power?
Your Ryobi Portable Generator engine may lack power because: * The engine may have been stored without treating or draining gasoline, or refueled with bad gasoline. To resolve this, drain the fuel and carburetor, then refuel with fresh gasoline. * The air filter might be dirty. Clean or replace it as needed.
What to do if AC receptacle does not work on Ryobi Portable Generator?
If the AC receptacle on your Ryobi Portable Generator isn't working: * The item plugged in may be defective, so try a different item. * The generator might be overloaded. Remove some loads and press the reset button.
General| Starting Wattage | 2300 watts |
|---|---|
| Running Wattage | 1800 watts |
| Engine Type | 4-Stroke OHV |
| Fuel Type | Gasoline |
| Engine Displacement | 79 cc |
| Run Time at 25% Load | 10 hours |
| Starting System | Recoil start |
| Inverter | Yes |
| Outlets | 2 AC outlets, 1 USB port |
| Fuel Tank Capacity | 1.2 gallons |
Advises locating the generator 20 ft. away to reduce carbon monoxide risk.
Warns about the deadly risks of carbon monoxide from generator exhaust.
Details risks associated with fuel handling and hot surfaces.
Provides critical warnings for safe gasoline handling and refueling.
Warns about fuel cap removal and hot engine parts.
Explains how to select items and calculate total running and starting watts.
Highlights critical warnings for CO, grounding, carelessness, and attachments.
Provides steps for checking and filling the engine oil level.
Details safe procedures for adding gasoline, including cooling and ventilation.
Outlines the steps for starting and stopping the generator engine.
Provides instructions for draining fuel from the tank and carburetor.
A table detailing maintenance tasks and their recommended intervals.
