Ryobi SC163VS - Parts and Tools; Loose Parts Included; Tools Needed for Setup

Page 8
LOOSE PARTS
Check all loose parts from the box with the list below. Assemble according to the instructions on the following pages.
• 3 mm T-Handle Hex Key
• 4 mm Hex Key
• Blade(s)
• Plastic Tubing
The following tools (not included) are needed for adjustments and alignment:
• Combination Square
• Phillips Screwdriver
• Slotted Screwdriver
COMBINATION
SQUARE
PHILLIPS SCREWDRIVER
Fig. 3
SLOTTED SCREWDRIVER
TOOLS NEEDED
Fig. 2
PLASTIC TUBING
BLADE
3 mm T-HANDLE HEX KEY
4 mm HEX KEY