To Next Page

To Previous Page

Page 8

LOOSE PARTS

Check all loose parts from the box with the list below. Assemble according to the instructions on the following pages.

■ Blade(s)

■ Operator's Manual (not shown)

The following tools (not included) are needed for adjustments and alignment:

■ Combination Square

■ Phillips Screwdriver

■ Slotted Screwdriver

SMALL

COMBINATION

SQUARE

PHILLIPS SCREWDRIVER

Fig. 3

SLOTTED SCREWDRIVER

TOOLS NEEDED

Fig. 2

PLAIN BLADE

ADJUSTABLE WRENCH

HEX KEY

PIN BLADE

■ Hex Key

■ Adjustable Wrench

Ryobi SC180VS User Manual

Questions and Answers: