EasyManua.ls Logo

s-shape SD-45S2SB - 1. The plug with grounding pin must be used before; 2. Ensure that the voltage of the instrument is su; 3. In order to ensure the treatment effect and nor; 4. The instrument should not be placed in damp pla

s-shape SD-45S2SB
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power:85W
Suction
Vacuum: <-80kPa
Pressure: >250kPa
Air flow: >10L/minute
Noise level: <70dB (30cm away)
Power:20W
EMS&EL (Electroporation) Facial Anti-aging Handle
EMS
Frequency: 4.5KHz
Power:10W
EL (Electroporation)
Frequency: 65Hz
Power:10W
Net Weight: 7.60kg
Gross Weight : 25.08kg
Dimensions: 490x390x300 (mm)
Input Power: AC 110V/220V 50/60Hz
Power Consumption:MAX 150W
Display: Touch Screen
3. Dos and Don’ts
1. The plug with grounding pin must be used before the instrument is used and the power
socket of the instrument is properly grounded.
2. Ensure that the voltage of the instrument is suitable. If the voltage of the local power supply is
not stable, we suggest that the user add a voltage regulator with matching power between the
mains and the instrument.
3. In order to ensure the treatment effect and normal service life of the instrument, please use
the specified parts provided or suggested by the original manufacturer.
4. The instrument should not be placed in damp places or near water sources, and should not be
directly exposed to sunlight.
5. Do not place the instrument near a strong heat source, as this may affect the life and normal
use of the instrument.
6. Before treatment, please remove all metal objects from the body first, so as to avoid
unexpected conditions and influence the curative effect.
7. Please restrain from using the device on eyes, thyroid, parathyroid, testicles, abdomen of
pregnant women, and pacemakers.
8. Patients who are suffering from illness should consult with a doctor and gain permission from
the doctor before using.
9. Please turn off the power switch of the device, and ensure that the total power supply of the
device is turned off before the staff leaves after daily use so as to ensure the safety of using the
electrical products.
10. Set the energy at lowest level at the beginning and slowly raise it after the customer adapts
to it.
11. Clean the instrument with normal saline after operation to ensure its cleanliness to prolong
its service life.
12. The handle can be used alone. Better results will be delivered if one handle works in
conjunction with other handles.