231Car care
Trunk lighting, SportCombi
1 Pull the lamp housing forward slightly
and lift it out at the rear. Use a thin and
wide tool.
2 Fit the new bulb. The bulb is secured in
the holder.
3 Start by inserting in the front edge of the
lamp housing and then pressing in the
rear edge.
Courtesy/floor lighting 3
1 Release one edge of the lamp fitting
using a screwdriver.
2 Fit the new bulb.
3 Insert the connector side first when refit-
ting the lamp.
Other bulbs
If any other bulbs need changing, we rec-
ommend that you visit a Saab dealer.
93_US_7carcare_MY09.fm Page 231 Tuesday, April 15, 2008 11:26 AM
To Next Page
Loading...
