287Technical data
Fuel
Engines
Electrical system
Brake system
Hydraulic unit for soft top, Convertible
Fuel tank capacity ___________________ 16.05 U.S. gal.
(61 l)
Gasoline Octane
Use regular unleaded gasoline with a
posted octane of 87 or higher.
Although not required, use higher octane fuel for optimum perfor-
mance - 90 octane for the 2.0T engine and 93 octane for the
2.8 V6.
Gasoline with a lower octane rating can be used, although not
lower than 87 octane. However, engine performance will fall
slightly and heavy loading and laboring should be avoided. For
further information on fuel, see page 158.
2.0T
Rating, SAE at 5300 rpm ____________ 210 hp (155 kW)
Maximum torque, SAE at 2500-4000 rpm 221 ft.lb. (300 Nm)
2.8 V6
Rating, SAEat 5500 rpm_____________ 280 hp (206 kW)
Maximum torque, front-wheel drive, SAE
at 1800-5000 rpm __________________ 262 ft.lb. (355 Nm)
Maximum torque, all-wheel-drive models,
SAE at 1900-4500 rpm______________ 295 ft.lb. (400 Nm)
Voltage ___________________________ 12 V
Battery capacity ____________________ 60 Ah
Foot brake (ABS) ___________________ Hydraulic disc
brakes with vacuum
servo unit. Diago-
nally split circuits;
ventilated discs on
front wheels (some
variants also have
ventilated rear
discs). EBD function
(see page 171).
Park brake_________________________ Acts on rear wheels
Brake fluid_________________________ To DOT 4.
Do not use DOT 5.
Oil capacity_______________________ 0.6 qt. (0.6 l)
Oil type __________________________ CHF 11S
93_US_MY09.book Page 287 Tuesday, April 15, 2008 10:30 AM