SAB Heli Division Goblin Kraken Urukay Genesis User Manual

Key information regarding serial number registration and model support.

Precautions for safe operation, flying areas, and pilot conduct.

Disclaimer regarding liability for product damage or loss.

Details on the warranty coverage and limitations for the product.

List of external components needed for assembly beyond the kit contents.

Essential tools, lubricants, and adhesives required for proper assembly.

Inventory of parts included within the main product box.

Instructions for assembling the carbon fiber frame components.

Steps for installing the battery tray and guide system.

Details for assembling the right side of the main helicopter frame.

Details for assembling the left side of the main helicopter frame.

Further steps for installing the battery tray and guide system.

Procedure for installing the belt tensioner mechanism.

Steps to assemble the uniball radius arms for the rotor head.

Procedure for assembling the main rotor's center hub.

Steps for assembling the standard radius arms for the rotor head.

Assembly of the first set of linkage rods for the head.

Detailed steps for assembling various hub components.

Procedure for assembling the swashplate mechanism.

Installation of the spindle and associated bearings.

Assembly of the second set of linkage rods for the head.

Guidance on selecting the correct motor reduction ratio.

Recommended configurations for battery, motor, and ESC.

Instructions for properly setting the motor belt tension.

Assembly of the tail blade grips and associated components.

Installation of the tail pitch slider mechanism.

Steps for installing the tail pulley and associated parts.

Assembly of the tail rotor bell crank lever.

Procedure for assembling the tail rotor unit.

Installation of the boom block support.

Steps for assembling the main tail boom.

Attaching the composite tail fin.

Installation of the tail locking element.

Installation and setup of the tail rotor servo.

Steps for assembling the carbon rod and support.

Method for correctly tensioning the tail rotor belt.

Installation of the low side frame mount bracket.

Installation of the left (SX) low side frame.

Installation of the right (DX) low side frame.

Mounting the front block for the canopy.

Installation of the main composite landing gear.

Final steps for assembling the landing gear.

Mounting the Flight Controller/Receiver plate.

Assembly of the left side canopy mounting base.

Assembly of the right side canopy mounting base.

Installation of the antenna support bracket.

Mounting the Flight Controller support structure.

Procedure for installing and securing the flight batteries.

Steps for fitting and securing the helicopter canopy.

Essential checks and procedures before taking flight.

Information on the HPS head and damper setup options.

Exploded view and list of spare parts for the transmission module.

Procedure for replacing the main shaft.