Saba LVS14C44MI18W User Manual (English)

Questions and Answers:

S
Samantha RuizAug 12, 2025
Why is my Saba LVS14C44MI18W not drying properly?
- R
  Richard VasquezAug 12, 2025
  If your Saba Dishwasher isn't drying dishes well, consider these possibilities: * The dishwasher might be loaded incorrectly. Make sure to load it as shown in the instructions. * There might not be enough rinse-aid. Try adding more rinse-aid or refilling the dispenser. * Dishes are being taken out too soon. Wait until they're barely warm to the touch before unloading, and start with the bottom rack to prevent water from the top rack from dripping down. * The wrong program was chosen. Pick a program with a longer wash time. * The cutlery might be low quality. Some cutlery isn't made to be washed in a dishwasher.
J
Joshua SantiagoAug 17, 2025
Why won't my Saba Dishwasher start?
- Q
  qwangAug 17, 2025
  Your Saba Dishwasher might not start due to several reasons: * A blown fuse or tripped circuit breaker. Replace the fuse or reset the circuit breaker. Also, avoid sharing the same circuit with other appliances. * The dishwasher isn't turned on, or the door isn't closed properly. Ensure the dishwasher is on and the door is securely closed. * Low water pressure. Check that the water supply is properly connected and turned on. * The dishwasher door is not properly closed and latched. Make sure to close the door properly and latch it.
W
Wesley GoldenAug 23, 2025
What to do if my Saba LVS14C44MI18W washing result is unsatisfactory?
- M
  Michelle ThompsonAug 23, 2025
  An unsatisfactory washing result from your Saba Dishwasher may occur due to: * Incorrect loading of dishes. Refer to the “Loading the Dishwasher Baskets” section for proper loading techniques. * The selected program isn't strong enough. Choose a more intensive program using the “Wash Cycle Table” as a guide. * Insufficient detergent. Increase the amount of detergent or try a different brand. * Items blocking the spray arms. Rearrange items to allow free spray arm rotation. * A dirty or incorrectly fitted filter combination in the wash cabinet's base, potentially blocking spray arm jets. Clean and correctly fit the filter combination and clean the spray arm jets. See “Cleaning the Spray Arms.”