Cutlery rack
(assembled on
the upper basket)
Cutlery basket
1� Teaspoons
2� Dessert spoons
3� Soup spoons
4� Gravy ladle
5� Serving fork
6� Forks
7� Knives
8� Serving spoons
The hardness of the water varies from place to place� If hard water
is used in the dishwasher, deposits will be formed on the utensils�
This appliance is equipped with a water softener which uses a salt
specically designed to eliminate the minerals from the water�
CAUTION:
• Only use salt specially formulated for domestic dishwashers�
• Do not use table salt as it contains insoluble substances which
may damage the water softening system�
• Fill the salt container before starting the washing
programme. In this way, the excess saline solution will be
immediately removed by the water; the prolonged presence of salt
water inside the tank may lead to corrosion�
• If you plan to use dishwasher tablets for your washing needs,
then you do not require to use salt or rinse agent but please note
that the rell salt indicator light will remain illuminated on the
control panel� This is quite normal and will not aect the operation
of your dishwasher�
Adjusting the salt consumption
1� After the dishwasher is switched on, enter the status of
adjusting the salt consumption by holding down
and until the value H4 (factory setting) ashes
on the display�
2� While the value is ashing repeatedly press to
adjust the setting from H0 to H7 to suit the water hardness�
3� Press to conrm the setting�
Using the Water Softener
5150
To Next Page
Loading...
Need help?
General
