Install 2 x AAA batteries as instructions.
When using the remote control, point it toward the remote con-trol signal receiver on
the main unit from a distance of 5 m (16 ft) or less. Do not place obstructions between
the main unit and the remote control.
The remote control might not work if the remote control signal receiver on the unit is
exposed to direct sunlight or bright light. If this occurs, try moving the unit.
Beware that use of this remote control could cause the unin-tentional operation of
other devices that can be controlled by infra.
Remote Control
Operating the remote control
Note
This remote controller use 2 x R03/AAA battaries.
A30a
Power ON/OFF
Enter the menu
Switch menu
Switch menu
Mute(Define in the menu)
Volume +
Change settings
Change settings
Volume -
FN
Switch input source
To Next Page
Loading...
