Need help?Do you have a question about the Sabiana EVECO Carisma Whisper CFF-ECM and is the answer not in the manual?
General| Type | Fan Coil Unit |
|---|---|
| Motor | ECM (Electronically Commutated Motor) |
| Voltage | 230V |
| Heat exchanger | Copper tubes and aluminum fins |
| Power | Varies by model |
| Noise Level | Low noise operation, specific levels vary by model |
| Frequency | 50 Hz |
| Weight | Varies by model |
| Diameter | Not applicable |
Explains the meaning of various symbols used in the manual.
Identifies the intended audience for the instruction manual.
Lists critical safety and installation warnings for proper unit operation.
Details the outer casing, fan assembly, motor, and coil of the unit.
Lists key technical data like sound pressure level and references for dimensions.
Provides operational limits for the fan coil unit and water flow rates.
Instructions for positioning the unit for optimal air intake and operation.
Illustrates the air intake and discharge for different unit versions.
Specifies the minimum required space around the unit for installation.
Provides guidance on drilling positions and wall mounting the fan coil unit.
Presents detailed diagrams and dimensions for installing the unit.
Illustrates the step-by-step process for mounting the unit on a wall.
Details on the air intake grid and how to orient the discharge airflow.
Instructions on how to safely detach the unit's casing for access.
Guidelines for connecting water pipes, including safety precautions and insulation.
Instructions for making electrical connections, including power supply and wiring.
Crucial safety advice for electrical installations and compliance with regulations.
Details on connecting wires to the unit's terminal board and access points.
Step-by-step guide for installing the UP-Touch power unit.
Instructions for connecting the electrical motor components.
Explains how to set the DIP switches for unit configuration.
Describes the function of auxiliary relays for external enabling of boiler or chiller.
Guide for installing the CB-Touch control module onto the unit.
Instructions for cleaning and replacing the unit's air filter.
Detailed steps for correctly re-inserting the air filter into the unit.
Procedures for checking and maintaining the unit's heat exchanger coils.
Outlines the annual routine maintenance tasks for the unit.
Explanation of symbols and abbreviations used in wiring diagrams.
Illustrates the standard electrical connection schematic for the unit.
Shows the specific wiring diagram for the CB-Touch control system.
Details the components and connections on the UP-TOUCH electronic board.
Provides physical dimensions for the MV version of the fan coil unit.
Provides physical dimensions for the IV version of the fan coil unit.
Details the hydraulic connections for the coils in different unit versions.
Shows the dimensions of the unit when packaged for transport.
Lists the weight specifications for the MV version of the unit.
Lists the weight specifications for the IV version of the unit.
Details on the 3-way valves accessory, including dimensions and flow rate charts.
Details on the 2-way valves accessory, including dimensions and flow rate charts.
To Next Page
