Need help?Do you have a question about the Sabiana QCV-MB and is the answer not in the manual?
General| Model | QCV-MB |
|---|---|
| Brand | Sabiana |
| Display | LCD |
| Power Consumption | 5 W |
| Communication Protocol | Modbus RTU |
| Type | Control Panel |
| Operating Temperature | 0°C to 50°C |
Guidance on correctly placing the air probe for aspiration.
Instructions for positioning the exchanger water probe (T3).
Details on T2 probe installation and its change-over function.
Details on the CA (F1-F1) contact for remote control or Summer/Winter mode.
Details on the CF (F2-F2) contact for window open or presence detection.
Instructions for setting the network end jumper for serial connections.
Guidelines for proper earthing of the RS485 serial communication network.
Specific configuration for 24 Vac 3-point valve actuators.
Specific configuration for ON-OFF 230 Vac valve actuators.
Instructions for the physical installation of the T-MB wall control unit.
Wiring and DIP switch settings for the T-MB control unit.
Operations for ON/OFF, temperature, mode, and fan speed selection.
Setting the clock, activating, deactivating, and programming timer functions.
Managing IAQ filter and electric heater functions and their operating logic.
Accessing service parameters and diagnostic information.
To Next Page
