Locate the CD that came with your CM1 and
insert the disc into the optical drive of your
Windows computer. Since the device is set up
and controlled via a web-browser interface, the
following instructions will also apply to the use
of a CMQ on an Apple MAC computer. A discus-
sion of how to locate the CM1 using a MAC is
included in the user’s manual.
5. Follow instructions on each screen and click
through: the License agreement, customer
information, setup, ready to install and nish
screens. Click on the “nish” button
6. Run the “CM1 Utility” by clicking on “Start”
and then click the “CM1 Utility” icon in the
start menu. The screen below appears.
Click on the “Search CM1” button in order to
locate your CM1 on your network. (gure-03)
NOTE: In order for the CM1 to be discover
able on your network, both the CM1 and
the computer you are running the CM1
Utility on must be on the same network.
The CM1 Utility will search the network for all
CM1’s connected to the local area network
(LAN) and display them in the small box on the
right. It should look something like this (gure-04).
To Next Page
Loading...