EasyManua.ls Logo

Saci e-Winner User Manual

Saci e-Winner
164 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
[e] Winner
[e] Winner
sacipumps.com
MANUAL DE INSTALACIÓN Y MANTENIMIENTO
INSTALLATION AND MAINTENANCE MANUAL
MANUEL D’INSTALLATION ET D’ENTRETIEN
MANUALE DI INSTALLAZIONE E MANUTENZIONE
INSTALLATIONS UND WARTUNGSANLEITUNG
MANUAL DE INSTALAÇAO E MANUTENÇAO
NÁVOD K INSTALACI A ÚDRŽBĚ
MONTAJ VE BAKIM TALİMAT EL KİTABI
הקוזחתו הנקתה

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Saci e-Winner and is the answer not in the manual?

Saci e-Winner Specifications

General IconGeneral
Maximum Suction Lift8 m
Pump BodyCast Iron
ImpellerBrass
ProtectionIP44
Insulation ClassF
Motor Power0.5 HP
Motor ShaftStainless Steel
Frequency50 Hz
MaterialCast Iron, Brass
Inlet/Outlet Size1 inch

Summary

SAFETY RULES

Before Installing and Using the Product

General safety precautions and warnings for the initial setup and operation of the pump.

During Normal Operation

Safety guidelines and warnings to follow while the pump is running.

INSTALLATION AND ASSEMBLY

Pump Installation Guidelines

Instructions for proper installation, including ventilation, electrical checks, and cable sizing.

ELECTRICAL CONNECTIONS

SCREEN FORMAT AND BUTTON FUNCTIONS

FIRST START-UP WIZARD: LANGUAGE AND UNITS

FIRST START-UP WIZARD: FILTER SETTINGS

GENERAL SETUP MENU

FILTRATION SETUP MENU

SALT CHLORINATOR SETUP

LIGHTS SETUP MENU

FILTER WASH & HEATING SETUP

ALARM LOG & RESET SETUP

ALARM MESSAGES AND SOLUTIONS

ALARM F01 OVERCURRENT

Indicates excessive motor consumption; check for obstructions.

ALARM F02 SHORT CIRCUIT

Indicates motor short circuit or disconnection; check wiring.

ALARM F03 EXCESS TEMPERATURE OF THE MODULE

Module overheating; ensure proper ventilation and ambient temperature.

ALARM F04 INPUT VOLTAGE

Input voltage outside limits; check electrical supply.

ALARM F06 MOTOR FAULT

Motor fault or loss of synchronism; check motor connections.

ALARM F07 LOW WATER LEVEL

Pump operating without water; ensure proper fluid aspiration.

ALARM F08 WITHOUT FLOW / MAX. PRESSURE

Filter dirty or valve closed; check filter and valves.

ALARM X13 INTERNAL ERROR

Internal frequency converter fault; check communication cable or cycle power.

Related product manuals