To Next PageTo Next Page
Need help?Do you have a question about the Saci OPTIMA and is the answer not in the manual?
General| Brand | Saci |
|---|---|
| Model | OPTIMA |
| Category | Water Pump |
| Language | English |
Symbol with Warning/Danger indicates risk level from not observing safety precautions.
Read manual carefully before installation. Electrical work by qualified personnel. Non-compliance cancels guarantee.
Self-induction pump for swimming pools with pre-filter. Designed for continuous operation, pumping water.
Power supply voltage, motor protection, insulation class, temperature limits.
Handle with care, avoid bumps. Use proper lifting tools and pallet.
Store pumps in a sheltered, dry, dust-free place. Keep in original packaging until assembly.
General installation guidelines, pump placement, surface, height above water, protection from flooding/freezing.
Recommend cut-off valves, ensure suction/impulsion piping diameter matches pump connection, slight inclination for suction.
Disconnect power before maintenance. Earth connection is essential. Thermal protection for single-phase motors.
Never operate off load. Check voltage/frequency. Fill pre-filter with water. Check pump shaft rotation.
Open valves, switch on pump. Wait for self-priming. Check motor current and adjust thermal relay.
Keep pre-filter basket clean. Disconnect power before maintenance. Dismantle by qualified personnel. Dispose environmentally.
Lists common faults like pump not priming, poor flow, noise, not starting, with causes and solutions.
Read manual, installation/maintenance by authorized personnel. Do not let children play. Manufacturer not liable for misuse.
Nominal values for power supply, motor voltage, frequency, intensity, protection rating.
Install in well-ventilated area, protected from moisture/sun/rain. Ensure correct cable size.
Diagram for connecting the pump to the controller and power supply.
Diagram labeling the main screen elements like Power LED, RUN LED, ALARM, buttons F1/F2.
Displays current time, day of the week, manual operation, and access to menu.
Controller features include QuickStart, timer control for pump/lights, three configurable cycles, day selection.
Features include manual activation, programmable salt chlorinator output, external intake control, protection against dry running.
Wizard guides through language, date, and time setup.
Submenus for language, date/time configuration.
Submenus for filtration settings (days, cycles, times) and amperage adjustment.
Submenu for lighting settings (days, start time, duration).
Submenus for history, maintenance reminders, meters, and intake/output configuration.
Intake/output allows activation of relay output for chlorinator and remote control. PT-100 probe for freeze protection.
Submenus for software version, factory reset, and warning management (alerts, alarms).
Manual pump activation (timed) and manual swimming pool lights activation (timed).
Wall mounting for controller and PT-100 temperature probe installation.
Controller guaranteed for 24 months. Use of original parts, alterations void warranty.
Follow local rules for disposal. Do not dispose of polluting parts into the environment.
