SACKit ROCKit S - Quick Start Guide; Connecting and Playing Music

4
QUICK START GUIDE
When you first get your ROCKit S earphones you need to charge them before they are ready for
use.
Start by placing your ROCKit S earbuds in the charging case. This is how the earbuds charge.
You can charge your case by using the attached USB-C cable and any 5V, 1A power supply.
Charge for 2 hours minimum.
The earbuds charge in the
charging case.
The charging case is charged
with a USB-C cable.
How to play music:
1. For rst use: remove ROCKit S earbuds from the case. Both earbuds will ash white on the top
edge LED
2. The le earbud will blink white, indicang ROCKit S is in pairing mode and the earbuds are con-
nected via True Wireless Stereo
3. Switch on Bluetooth on your device
4. Choose “ROCKit S” under Bluetooth sengs on your device. Your earbuds are now connected
with your device
5. Start playing music on your device
6. ROCKit S automacally switches on/o when connected/disconnected to the charging case. Ma-
nually power on/o by holding down the earbud buons for 10 seconds
7. ROCKit S will automacally pair with the last connected device.
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecng opportunity won’t appear on the new device.
Please turn o your earbuds aer use to get a longer baery life. The earbuds turn o automa-
cally when placed in the charging case.