6
Use ROCKit S earphones
1. For rst use: Remove ROCKit S earbuds from the case. Both earbuds will blink white on the top
edge LED
2. The le earbud will blink red/white, indicang ROCKit S is in pairing mode and the earbuds are
connected via True Wireless Stereo
3. Switch on Bluetooth on your device
4. Choose “ROCKit S” under Bluetooth sengs on your device. Your earbuds are now connected
with your device
5. Start playing music on your device
6. ROCKit S automacally switches on/o when connected/disconnected to the charging case.
Manually power on/o by holding down the earbud buons for 10 seconds
How to pair ROCKit S earbuds with Bluetooth devices
1. Simply remove your ROCKit S earbuds from the charging case or long press the X buon on your
earbuds for 10 seconds. Aer the rst 5 seconds, you will hear the ON sound. Keep pressing the
buon for another 5 seconds to turn on pairing mode, indicated by ashing red and white LED
lights
2. Please keep the earbuds and Bluetooth device in range of 1 meter when pairing and make sure
ROCKit S is turned on
3. Go into the Bluetooth sengs on your device and search for new Bluetooth devices and select
ROCKit S
4. The LED light will blink white once ROCKit S is successfully paired
5. Long press X buon on the earbuds to turn o your ROCKit S earbuds
6. ROCKit S can remember 8 devices: You can pair 8 units with your ROCKit S, at 9th unit ROCKit S
will forget the rst connected
Operation instructions for use after first pairing
1. Aer rst me pairing your ROCKit S earbuds and Bluetooth device will automacally reconnect
2. Turn the earbuds on by holding down the X buon unl you hear the ON sound or by removing
the earbuds from the case
3. Long press X buon to turn o
7. ROCKit S will automacally pair with the last connected device.
8. To connect to a new device make sure that the previous connected device is disconnected
otherwise connecng opportunity won’t appear on the new device.
To Next Page
Loading...
