INSTALLATION
The machine is warming
up; the light remains off.
Note: You must load the circuit before starting up the
machine for the first time, if it has been inoperative for a
lengthy period or if the water tank has been completely
emptied. Moreover, the circuit must be loaded when-
ever the indicator light flashes:
Turn the knob countercloc-
kwise to start loading the
circuit.
Turn the knob clockwise
to terminate the circuit-
loading process.
When the light goes on,
the machine is ready for
use.
If necessary, remove
the swivel ring from the
packing container and t
it into the machine.
Fill the tank with fresh drin-
king water.
Move the ON/OFF switch to
“I” to turn on the machine.
Fill the coffee bean container
with coffee beans.
Remove the drip tray from
the packing container and
t it into the machine.
Insert the plug into a sui-
table electric socket.
Place a container beneath
the steam tube.
Wait until a steady stream
of water ows out from the
nozzle.
Remove the container.
See rating plate
To Next Page
Loading...
Need help?
General
