Saeco 10001565 - Boiler Descaling Cycle Menu

32
5
2
4
3
1
6
Press “boiler descaling cycle”
«BOILER DESCALING CYCLE» MENU
To perform the automatic descaling cycle.
Descaling is necessary every 3-4 months or when the machine indicates it. The machine must be turned on and will
automatically manage the distribution of the descaler.
A PERSON MUST BE PRESENT DURING THE OPERATION.
WARNING! NEVER USE VINEGAR AS A DESCALER.
Saeco descaler is recommended; however, you can use any non-toxic and/or non-harmful descaling product for coffee
machines, commonly available in retail stores. The used solution is to be disposed of according to the manufacturer’s
instructions and/or regulations in force in the country of use.
Note: before beginning the descaling cycle make sure that:
1. a large enough container is positioned under the water spout;
2. THE “AQUA PRIMA” WATER FILTER HAS BEEN REMOVED.
boiler
descaling
cycle
no
MAINTENANCE
no
yes
Do you wish to perform the
GHVFDOLQJF\FOH"
Turn the knob to the
reference.
Place a large enough container
beneath the hot water spout.
Pour the descaling solution into the
WDQNDQG¿OOWKHWDQNZLWKZDWHU
Insert the tank into the machine.
Press “yes” to start.
Descaling is carried out at a controlled temperature. If the machine is cold, you must wait until it has reached the
right temperature; otherwise you must cool the boiler as follows:
When the following message
appears, the heater is at the right
temperature
¿OOWKHZDWHUWDQNZLWKWKH
descaling solution
¿OOWKHZDWHUWDQNZLWKWKH
descaling solution
Press the button to start.
1.4.3. boiler descaling cycle