The Saeco Minuto Classic Milk Frother (Type HD8775) is a fully automatic coffee machine designed for preparing espresso and coffee using whole coffee beans, and for dispensing steam and hot water. It is equipped with a self-adjusting system that optimizes coffee extraction based on the compactness of the ground coffee, making it suitable for all types of coffee beans except flavored ones.
Function Description:
The machine allows users to brew various coffee beverages, including espresso, medium coffee, and long coffee, using either whole coffee beans or pre-ground coffee. It also features a Classic Milk Frother for dispensing steam and hot water, enabling the preparation of cappuccinos and other milk-based drinks. The control panel provides intuitive access to different functions and settings, including coffee strength adjustment, cleaning cycles, and descaling reminders.
Important Technical Specifications:
- Nominal Voltage - Power Rating - Power Supply: See label on the inside of the service door.
- Housing material: Thermoplastic material.
- Size (w x h x d): 215 x 330 x 429 mm / 8.5 x 13 x 16.9 inches.
- Weight: 7.2 kg / 16 pounds.
- Power cord length: 800 - 1200 mm / 32-47 inches.
- Control panel: Front panel.
- Classic Milk Frother: Special for cappuccino.
- Cup sizes: Up to 178mm / 7 inches.
- Water Tank: 1.8 liters - Removable type.
- Coffee bean hopper capacity: 250 g / 1 cup.
- Coffee grounds drawer capacity: 15.
- Pump pressure: 15 bar.
- Boiler: Stainless steel type.
- Safety devices: Thermal fuse.
- Energy Saving: Class A energy label, automatic shut-off after 30 minutes of inactivity, stand-by mode energy consumption below 1Wh.
Usage Features:
- First-Time Use: Requires circuit priming, an automatic rinse/self-cleaning cycle, and a manual rinse cycle.
- Water Hardness Measurement and Programming: Includes a water hardness test strip to define descaling frequency and optimize the "INTENZA+" water filter settings.
- "INTENZA+" Water Filter: Recommended for preventing limescale build-up and preserving coffee aroma. Installation involves removing the small white filter, immersing the "INTENZA+" filter in cold water, inserting it into the water tank, filling the tank, and dispensing all water using the hot water function. The machine can be programmed to manage the filter and remind the user when to replace it.
- Adjustments:
- Ceramic Coffee Grinder: Adjustable to personal taste using the grinder adjustment key, with five different grind settings from coarse to fine.
- Aroma (Beverage Strength): Adjustable through five choices, from extra mild to pre-ground coffee, by pressing the "aroma" button.
- Dispensing Spout: Height-adjustable to accommodate different cup sizes. The lower part can be removed for larger tumblers.
- "ESPRESSO" or "COFFEE" Selection Lever: Allows selection between espresso (lever downwards) and coffee (lever upwards) brewing functions.
- Beverage Cup Length: Programmable by pressing and holding the desired brew button until the "MEMO" icon appears, then releasing it when the desired coffee amount is reached.
- Brewing Espresso: Can be brewed using coffee beans (1 or 2 cups) or pre-ground coffee (1 scoop). The process involves selecting the "ESPRESSO" function, choosing the desired aroma, and pressing the brew button.
- Brewing Coffee: Can be brewed using coffee beans (medium or long coffee) or pre-ground coffee. The process involves selecting the "COFFEE" function, choosing the desired aroma, and pressing the brew button.
- Dispensing Steam/Cappuccino Brewing: Involves filling a container with cold milk, immersing the Classic Milk Frother, and pressing the steam button. The machine pre-heats, then froths the milk.
- Hot Water Dispensing: Involves placing a container under the Classic Milk Frother and pressing the hot water button.
Maintenance Features:
- Daily Cleaning: Includes cleaning the machine, water tank, and Classic Milk Frother. The coffee grounds drawer and drip tray should be emptied daily.
- Weekly Cleaning: Involves cleaning the drip tray, pre-ground coffee compartment with a cleaning brush, the lower part of the dispensing spout, and disassembling and cleaning the Classic Milk Frother components. The brew group should also be cleaned weekly.
- Monthly Lubrication of the Brew Group: The brew group should be lubricated after approximately 500 cups of coffee or once a month using Saeco grease (HD5061).
- Monthly Cleaning of the Brew Group with "Coffee Oil Remover": Recommended after approximately 500 cups of coffee or once a month. This involves inserting a "Coffee Oil Remover" tablet into the pre-ground coffee compartment, running a brewing cycle, and then thoroughly rinsing the brew group and drip tray.
- Monthly Cleaning of the Coffee Bean Hopper: Clean once a month when it is empty with a damp cloth.
- Descaling: The machine will indicate when descaling is needed with a "CALC CLEAN" icon. The descaling process takes approximately 35 minutes and requires a specialized descaling solution (CA6700). It involves removing the water filter, adding descaling solution to the water tank, starting the descaling process, and then performing multiple rinse cycles.
- Error Codes: The machine displays error codes (e.g., "Exx") if malfunctions occur, and users are advised to contact Philips SAECO hotline for support.
Important Safeguards:
- Read all instructions before use.
- Do not touch hot surfaces.
- Do not immerse cord, plugs, or appliance in water.
- Close supervision is necessary when used by children.
- Unplug from outlet when not in use and before cleaning.
- Do not operate with a damaged cord or plug or after malfunction.
- Use only recommended accessory attachments.
- Do not use outdoors.
- Do not let cord hang over edges or touch hot surfaces.
- Do not place on or near hot gas/electric burners or heated ovens.
- Always attach plug to appliance first, then to wall outlet.
- Do not use for other than intended use.
- Never fill the water tank with warm, hot, sparkling water or other liquids.
- Never clean with scrubbing powders or harsh cleaners.
- Use purified or bottled water for optimal coffee taste.
- Do not use caramelized or flavored coffee beans.
- Only adjust the ceramic coffee grinder using the grinder adjustment key.
- Add only pre-ground coffee to the pre-ground coffee compartment.
- Danger of scalding when dispensing steam or hot water; use appropriate protective handle.
- Never drink the descaling solution or any products dispensed during the descaling cycle.
- Not descaling the machine will ultimately make it stop working, and this will not be covered under warranty.
Need help?
General
To Next Page