Saeco MIRAGE COMBI DEU 001H User Manual (English)

Questions and Answers:

D
Drew BallardAug 7, 2025
Why is my Saeco Dehumidifier not turning on?
- S
  santiagomaryAug 7, 2025
  If your Saeco Dehumidifier isn't running, first, ensure it's properly plugged into the outlet. If that's not the issue, check if the water tank is full and empty it if needed, then reinsert it correctly. Also, make sure the condensation collection tank is correctly inserted. For models like Mirage, Mirage Combi, and Mirage Plus, verify that the ON/OFF button is pressed. Finally, ensure the set degree of dehumidification hasn't been reached; if it has, increase it using the appropriate knob. Additionally, ensure that the seat of the floater has been completely emptied.
B
barberrobinAug 13, 2025
How to improve dehumidification in my Saeco MIRAGE COMBI DEU 001H Dehumidifier?
- C
  Cathy VargasAug 13, 2025
  If your Saeco Dehumidifier isn't dehumidifying adequately, try these steps. First, increase the desired degree of dehumidification using the appropriate knob. Next, check the air filters and clean or replace them if they are obstructed. If you have a Mirage, Mirage Combi, or Mirage Plus model, increase the air speed.
B
Brooke MeyersAug 19, 2025
What to do if my Saeco MIRAGE COMBI DEU 001H is running but not removing moisture?
- D
  David KimAug 19, 2025
  If your Saeco Dehumidifier is running but not dehumidifying, first check the air filters and clean or replace them if obstructed. Also, it's normal for the dehumidifier to not work if the room's temperature or humidity is too low; check the “running limits” table to verify the surrounding conditions.
J
Jonathan FinleyAug 27, 2025
Why is there no airflow from my Saeco MIRAGE COMBI DEU 001H?
- G
  Glen WilsonAug 27, 2025
  If there is no air flow from your Saeco Dehumidifier, first check the air filters and clean or replace them if they are obstructed. If you have a Mirage S model, increase the degree of dehumidification desired using the appropriate knob until the LED is on, then wait for the technical starting time.
M
Maria YangAug 31, 2025
Why is my Saeco MIRAGE COMBI DEU 001H (Mirage Combi) not heating?
- C
  Charles LuceroAug 31, 2025
  If the Combi or Heating mode is selected on your Saeco Dehumidifier (Mirage Combi) but the room isn't heating, it could be due to a tripped safety protection relay for the heating element. Unplug the unit for 2 minutes, find and fix the cause of the overheating, then plug it back in. Also, check if the selected temperature has been reached; if it has and you want a higher temperature, select a higher setting.

Saeco MIRAGE COMBI DEU 001H Specifications

General

Brand	Saeco
Model	MIRAGE COMBI DEU 001H
Category	Dehumidifier
Language	English

Summary

Suggested Uses and Safety Guidelines

Suggested Uses for Your Dehumidifier

Lists recommended applications for the dehumidifier, such as drying laundry and preventing condensation.

Safety Guidelines

Outlines critical safety precautions for operating the appliance, including electrical and handling safety.

Installation, Handling, and Disposal

Installation and Handling

Details procedures for setting up, moving, and ensuring proper placement of the dehumidifier.

Disposal

Provides instructions on how to responsibly render the appliance inoperable and dispose of it.

Component Description and Features

Description of Components

Identifies and explains the different parts of the dehumidifier, referencing figure labels.

Exclusive and Other Features

Highlights unique functionalities like the 'Air in bloom' system and other features like anti-drip.

Description of Controls

Controls and Indicators (Mirage/Mirage Combi)

Explains the controls and indicators for the Mirage and Mirage Combi models, referencing specific figures.

Controls and Indicators (Mirage S & Mirage Plus)

Mirage S Controls and Indicators

Details the controls and indicators specific to the Mirage S model.

Mirage Plus Controls and Indicators

Outlines the controls and indicators for the Mirage Plus model, including the humidity display.

Modes of Operation

Dehumidification Mode

Explains how to operate the dehumidifier in its primary dehumidifying function for various models.

Combi Mode Operation

Describes the combined dehumidification and heating mode for Mirage Combi models.

Heating Mode Operation

Details the heating-only operation for Mirage Combi models.

Condensation Collection Tank Handling

Explains how the condensation collection tank works and the procedure for emptying and replacing it.

Room Humidity Indication (Mirage Plus)

Describes the humidity display feature on the Mirage Plus model and its indications.

Cleaning and Maintenance

General Operation Notes

Provides general operational notes, including temperature changes and power disruption handling.

Cleaning Procedures

Covers essential cleaning procedures for the dehumidifier, including plastic parts and filters.

Filter Maintenance

Explains the maintenance schedule for cleaning and replacing the net and activated charcoal filters.

Storage Recommendations

Advises on proper storage procedures for the dehumidifier when it is not in use for extended periods.

Troubleshooting

Problem Diagnosis and Solutions

Lists common problems, their possible causes, and recommended solutions for the dehumidifier.

Drainage Installation and Restoration

Installation with Direct Drainage

Guides on setting up continuous condensation drainage using a pipe, including warnings.

Restoring to Condensation Tank

Explains the procedure to revert from direct drainage back to using the condensation collection tank.

Related product manuals

Saeco MIRAGE DEU 001

74 pages

Saeco MIRAGE PLUS DEU 001