Saeco MIRAGE PLUS DEU 001

Questions and Answers

N
Nicole JacksonAug 8, 2025
Why is my Saeco MIRAGE PLUS DEU 001 not turning on?
- S
  Sophia RobersonAug 8, 2025
  If your Saeco Dehumidifier isn't running, first, ensure it's properly plugged into the outlet. If that's not the issue, check if the water tank is full and empty it if needed, then reinsert it correctly. Also, make sure the condensation collection tank is correctly inserted. For models like Mirage, Mirage Combi, and Mirage Plus, verify that the ON/OFF button is pressed. Finally, ensure the set degree of dehumidification hasn't been reached; if it has, increase it using the appropriate knob. Additionally, ensure that the seat of the floater has been completely emptied.
J
Joshua HarringtonAug 13, 2025
How to improve dehumidification in my Saeco Dehumidifier?
- S
  Sarah EllisAug 13, 2025
  If your Saeco Dehumidifier isn't dehumidifying adequately, try these steps. First, increase the desired degree of dehumidification using the appropriate knob. Next, check the air filters and clean or replace them if they are obstructed. If you have a Mirage, Mirage Combi, or Mirage Plus model, increase the air speed.
D
Donald SmithAug 19, 2025
What to do if my Saeco Dehumidifier is running but not removing moisture?
- M
  Michelle Marks MDAug 20, 2025
  If your Saeco Dehumidifier is running but not dehumidifying, first check the air filters and clean or replace them if obstructed. Also, it's normal for the dehumidifier to not work if the room's temperature or humidity is too low; check the “running limits” table to verify the surrounding conditions.
B
Barbara WhiteAug 26, 2025
Why is there no airflow from my Saeco Dehumidifier?
- J
  Jeffrey Collins DDSAug 26, 2025
  If there is no air flow from your Saeco Dehumidifier, first check the air filters and clean or replace them if they are obstructed. If you have a Mirage S model, increase the degree of dehumidification desired using the appropriate knob until the LED is on, then wait for the technical starting time.
W
wpatelSep 1, 2025
Why is my Saeco Dehumidifier (Mirage Combi) not heating?
- A
  Andrew TorresSep 1, 2025
  If the Combi or Heating mode is selected on your Saeco Dehumidifier (Mirage Combi) but the room isn't heating, it could be due to a tripped safety protection relay for the heating element. Unplug the unit for 2 minutes, find and fix the cause of the overheating, then plug it back in. Also, check if the selected temperature has been reached; if it has and you want a higher temperature, select a higher setting.