Saeco International Group Page 2 / 2
TALEA / ODEA - LINE 02 TECHNICAL SPECIFICATIONS
Connection values / power
consumption:
230 V~, 50/60 Hz, 1500 W
Temperature control: Temperature sensor (NTC, 20°C approx. 61 kOhm)
Safety equipment: 2 safety thermostats, can resist 175°C
Power output of stainless boiler: 1300 W - to dispense coffee, hot water and steam
Electrical cup lift
*Talea Touch and Ring Plus only
Stepping motor 24VDC
Tank water level and
residual water tray sensor
Capacitive sensor
Gear motor: DC motor with 2 rotating directions (24VDC)
Actively heated cup warmer:
*Talea Touch and Ring Plus only
PTC control
Pump: Ulka reciprocating piston type pump with thermal safety
100°C
48 W, 230V, 50 Hz, Type EP5 approx. 13-15 bar
Safety valve: Opens at approx. 18-20 bar
Water fi lter: in tank
Coffee grinder: DC motor with
ceramic grinders
Multi-way valve: 15 W
Coffee dose control Hall sensor - pulse control. Adjustable
coffee dosage from approx. 7 - 10.5 g set via program.
Power consumption: During heating phase - approx. 5.6 A
Dimensions: W x H x D in mm: 300/375/410
Weight: approx. 10 kg
Water tank capacity: approx. 1.7 l.
Coffee container fi lling capacity approx. 250g coffee beans
Dreg drawer capacity 14
Continuous-fl ow heater capacity: approx. 10 ccm
Water circuit fi lling time: approx. 15 seconds for fi rst fi lling cycle
Heating time: approx. 45 seconds
Grinding time: approx. 8-10 seconds
2.1. Technical specifi cations
To Next Page
Loading...
Need help?
General
