SAESHIN FORTE 400a

To Next Page

To Previous Page

Error Code Cause

· Handpiece Overload

· Operation as condition

open the chuck

· If operation by the hand, press the motor button.

· If operation by the foot, release the foot controller.

· Operate after cooling for about 10 minutes

at the cool place.

· If the problem is not resolved, contact the manufacturer.

· Use after closing the chuck of handpiece.

· Defective handpiece assembly

· Defective bearing

· Defective motor

· Contact the manufacturer.

Remedy

Error Code Cause Remedy

■ Error Code

- FORTE 100

- FORTE 100α, FORTE 100αD

· Defective connection of

handpiece

· Abnormal operation of motor

· Handpiece Overload

· Operation as condition

open the chuck

· Check the connect condition of power cord and

handpiece cord.

· If the problem is not resolved, contact the manufacturer.

· Re-turn on the power.