INTEGRA/-S/-G/-GS User Manual INSTALLATION
SAF Tehnika JSC
Initial setup in the indoor environment
Integra-S/Integra-GS FODUs can be interconnected using a test kit (available for purchase
as an optional accessory). P/N is DxxTST01, where xx – frequency band, e.g. D11TST01 for
11GHz. The exception is 17 and 24GHz radios.
The test kit consists of an adapter flange, waveguide-to-coaxial adapter, attenuators, and
coaxial cable.
In the case of 17 and 24 GHz radios a test tube (P/N D0S17TST01 or D0S24TST01) should
be used:
To Next Page
Loading...
