Need help?Do you have a question about the SAF Integra-X and is the answer not in the manual?
Details on device labels and their contained information.
Information on Integra-X conformity to exposure limit guidelines.
Performing initial setup and verification in a safe indoor environment.
Steps for physically attaching the Integra-X FODU to the antenna.
Guidance on configuring link polarization for optimal performance.
Ensuring proper grounding connection for safety and stability.
Details on connecting power sources to the Integra-X unit.
Important considerations for antenna and XPIC alignment.
Instructions for connecting the FO interface using a fiber conduit kit.
Initial setup steps and powering options for Integra-X FODU.
Specifies the requirements for accessing the Integra-X Web GUI.
Configuration of Ethernet connection and access to the Web GUI.
Description of the Web GUI's top panel, menu, and main window sections.
How to modify parameters, save changes, and log out.
Configuring XPIC mode and viewing its main window status.
Steps for configuring single polarization mode.
Viewing and modifying radio configuration in XPIC mode.
Displaying radio status in single polarization mode.
Managing VLANs, including status and modification options.
Enabling/disabling ports and changing link speeds.
Setting ingress and egress rates for ports.
How to clear MAC address records from the table.
Summarizes current alarms with date, time, and name.
Clearing, filtering, and downloading alarm event logs.
Organizing sensors into groups for monitoring and analysis.
Selecting sensors and time periods for performance graphs.
Choosing sensor parameters and downloading performance logs.
Understanding the statistics for Ethernet ports.
Options to clear all or individual QoS statistics.
Visualizing equalizer coefficients and frequency response.
Analyzing signal quality and interference using constellation diagrams.
Displaying Rx spectrum for different bandwidths.
Options to clear modem statistics and understand their meaning.
Step-by-step guide for upgrading firmware via Web GUI.
Configuring SNMPv1/v2c and SNMPv3 parameters.
Saving, loading, and resetting system configuration files.
Managing user accounts, permissions, and passwords.
Configuring system time, timezone, and NTP client.
Enabling/disabling and configuring Web GUI access and RADIUS.
Enabling modem loopback for testing and specifying duration.
Process for generating and downloading troubleshooting archives.
Viewing, uploading, and activating license files.
Steps for connecting to the serial terminal using PuTTY.
Steps for establishing an SSH connection using PuTTY.
Steps for establishing a Telnet connection using PuTTY.
How ACM technology improves link utilization and capacity.
Explanation of the adaptive equalizer's role in channel compensation.
Using the FTP directory for backups, firmware, and license uploads.
Steps for configuring RADIUS server authentication.
Using the LLD tool to discover devices and reset settings.
Details on the RJ-45 port, its compliance, and pinouts.
Information on the 2-wire DC power port and cable length calculations.
Details on SFP transceiver connectivity and USB port access.
Understanding RSSI LED modes and RSSI/audio port functionality.
Guidance on establishing a proper grounding connection.
Overview of general, port, antenna, and Ethernet specifications.
Details on power consumption, mechanical dimensions, and environmental ratings.
Maximum Tx power and RSL thresholds for different modulations.
To Next Page
General