SAF Integra-X - Ethernet Switch Statistics

INTEGRA-X User Manual WEB GUI
SAF Tehnika JSC 56
CLI commands
See Chapter 4: COMMAND LINE INTERFACE
log perf show
{1M|15M|60M} last
<1…1440> <sensor>
Use to show a specified number of last performance log
entries with specified sensor log step.
log perf show
{1M|15M|60M} time
<start_time> <end_time>
<sensor>
Use to show entries for a certain time frame.
Following formats are supported: YYYY-MM-DD/hh:mm:ss;
MM-DD/hh:mm:ss; MM-DD/hh:mm; hh:mm:ss; hh:mm
log perf clear
Use to clear performance log.
Performance  Ethernet  Ethernet switch statistics
Figure 3-50 Accessing Ethernet switch statistics
List Ethernet switch statistics. Please see the next page Figure 3-51 Ethernet switch statistics
status .