SAF Integra-X - Activating and Managing Modem Loopback

INTEGRA-X User Manual WEB GUI
SAF Tehnika JSC 87
Figure 3-97 below shows an example of the Main status page during modem loopback:
Figure 3-97 main page indicating Loopback
CLI commands
See Chapter 4: COMMAND LINE INTERFACE
modem loopback
Use to show modem loopback status.
modem loopback digital
<10..1000000>
Use to enable modem loopback for a specified time in
seconds.
modem loopback digital none
Use to disable modem loopback.