Need help?Do you have a question about the SAF NERTABLOC TH 400 PW and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Welding Current Range | 5 - 400 A |
| Protection Class | IP23 |
| Input Voltage | 400 V |
| Duty Cycle | 400 A @ 60% |
Information on electric arc welding equipment with gas shielding.
Safety precautions related to electrical connections and the workstation.
Guidelines for operator safety, covering external and internal injury risks.
Safety instructions for using gases, including common precautions and specific gas guidance.
Information on installation and use according to standard PREN 50199.
Methods to reduce electromagnetic emissions, including mains supply, maintenance, and grounding.
Details and identification of the welding machine's components.
Key technical data and specifications of the welding equipment.
Procedures for unpacking the welding equipment upon delivery.
Step-by-step guide for installing the welding machine.
Connecting welding cables and accessories for proper setup.
Guidance on connecting power, starting, and stopping the welding machine.
Explanation of the different operating modes of the welding machine.
Details on the functions and cycles for TIG welding operations.
Information on recommended applications and electrode choices for different welding processes.
Instructions for using the manual remote control for welding current adjustment.
Instructions for using the foot operated remote control for welding.
Details on the extension lead for remote controls.
Information and operation of the pulse welding feature.
Routine maintenance tasks to keep the equipment in good working order.
List of recommended spare parts for the welding equipment.
Schematic diagram of the welding machine's electrical components.
Diagram showing the placement of components on the regulation board.
To Next Page
