To Next PageTo Next Page
Need help?Do you have a question about the SAF SAXOTIG 1600 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Input Current | 16 A |
| Frequency | 50/60 Hz |
| Welding Process | TIG |
| Welding Current Range | 5-160 A |
| Protection Class | IP23 |
Covers electrical safety, connection, maintenance, and troubleshooting.
Addresses safety related to fumes, vapors, and harmful/toxic gases.
Focuses on eye protection from arc radiation and filter selection.
Discusses noise levels and necessary hearing protection.
Details fire prevention measures around the welding area.
Provides safety guidelines for handling compressed gases.
Emphasizes the importance of personal protective equipment.
Introduces the SAXOTIG 1600 as a portable generator.
Lists the items included in the SAXOTIG 1600 package.
Identifies and describes the external components of the generator.
Provides detailed technical specifications of the power source.
Lists the physical dimensions and weight of the generator.
Instructions for unpacking the welding generator.
Steps for connecting the generator to the power supply.
Guides on connecting the gas supply to the pressure reducer.
Details how to connect welding equipment like torch and ground clamp.
Explains how to start up the SAXOTIG 1600 generator.
Describes how to choose between TIG and electrode welding modes.
Details how to adjust welding current and pre-gas settings.
Explains the function of the thermal fault indicator and fan operation.
Describes the 2-T and 4-T welding cycles for TIG operation.
Provides guidelines for routine maintenance of the generator.
Lists available spare parts with their references.
