Need help?Do you have a question about the SAF SBS 1918 H0 and is the answer not in the manual?
Safety precautions to be read before any inspection or repair.
Safety measures for lifting and supporting vehicle axles.
How to perform a function test on the brake system.
Table of recommended inspection intervals for brake components.
Detailed procedures for various brake inspections.
Procedure to check brake pad thickness and wear.
Measuring and checking brake pad clearance.
Inspecting the brake disc for wear, damage, and cracks.
Checking the caliper's ability to slide freely on guide pins.
Measuring the clearance of the brake caliper bearing.
Steps for removing and installing brake pads.
Detailed procedure for removing brake pads.
Steps for correctly installing new brake pads.
Procedures for replacing the brake chamber.
Detailed steps for removing the brake chamber.
Steps for correctly installing the brake chamber.
Procedures for replacing the slide function assembly.
Procedures for fully replacing the reset shaft.
Procedures for replacing the entire disc brake unit.
To Next Page
General