SAF SBS 2220 H0 User Manual

Repair Instructions
Compressed Air Disc Brake
SAF SBS 2220 H0
SAF SBS 1918 H0
XL-SA30000RM-en-DE Rev A • 02.2016
Translation of the original repair instructions

SAF SBS 2220 H0 Specifications

General

Brand	SAF
Model	SBS 2220 H0
Category	Other
Language	English

Summary

2 Safety precautions

2.1 General information

Details safety precautions for all inspection, repair, and installation procedures.

3 Initial and final procedures

3.2 Initial procedure

3.3 Function test

Details checking adjustment unit and wheel rotation.

3.4 Final procedure

4 Inspection procedures

4.3 Inspections

Details various inspection checks for brake components.

4.3.3 Checking brake pad wear

Procedures for inspecting brake pad wear using indicator and measurement.

4.3.4 General brake pad clearance check

Checks clearance between brake calliper and outer brake pad using feeler gauges.

4.3.5 Checking the brake disc

4.3.8 Checking the actuation interface

4.3.11 Checking the slide function

Checks free mobility of the brake calliper on the guide pin.

4.3.12 Measuring the bearing clearance

Measures brake calliper clearance using a dial gauge.

5 Replacement procedure

5.2 Replacing the brake pads

Details steps for removing and installing new brake pads.

5.3 Replacing the brake chamber

Procedures for removing and installing the brake chamber.

5.4 Replacing the adjustment screw bellows

Steps for removing, cleaning, and installing adjustment screw bellows.

5.5 Replacing the slide function assembly

Instructions for removing/installing slide function assembly components.

5.6 Fully replacing the reset shaft

5.7 Replacing the disc brake

Steps for removing and installing the entire disc brake unit.

6 Specifications

6.1 Wear limits

6.2 Tightening torques

8 Fault finding