EasyManua.ls Logo

Safavieh FLL4031A User Manual

Safavieh FLL4031A
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
Model# FLL4031A
Product Dimensions: 16"X16"X 64"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the
outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension cord
unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X F Harp 1X
B Lamp Body 1X G Shade 1X
C Neck 1X H Finial 1X
D Saddle 1X I Bulb 1X
E Socket 1X
Question and Answer IconNeed help?

Do you have a question about the Safavieh FLL4031A and is the answer not in the manual?

Safavieh FLL4031A Specifications

General IconGeneral
BrandSafavieh
ModelFLL4031A
CategoryHome Lighting
LanguageEnglish

Summary

Care and Maintenance

Notice & Important Safety Instructions

Preparation and Assembly

Assembly Step 1: Part Alignment

Ensure all parts align correctly before assembly. Securely connect lamp body sections and base.

Assembly Step 2: Shade and Bulb Installation

Attach the harp and shade, then secure the finial. Install the bulb into the socket.

Assembly Step 3: Stability Check

Place the assembled lamp on a level surface and check for stability before use.

Related product manuals