Safavieh RENATO FLL4006A User Manual

WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug
will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a
qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush
attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of
chemicals and household cleaners as they may damage the finish.
Model# FLL4006A
Product Dimensions: 13.5"LX13.5"WX63.5"H
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use
and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A.B.C Lamp body tube 1X F shade 1X
D Lamp base 1X G socket 1X
E Bulb 1X H cord and switch 1X
1/2

Safavieh RENATO FLL4006A Specifications

General

Brand	Safavieh
Model	RENATO FLL4006A
Category	Home Lighting
Language	English

Summary

Polarized Plug Safety Warning

Care and Maintenance

Important Safety Instructions

Part Verification Before Assembly

Verify all parts are present before starting assembly to ensure a smooth and safe process.

Surface Protection During Assembly

Assemble the item on a soft surface to prevent scratching the finish during the assembly process.

Safe Use and Installation Guidelines

Follow guidelines to reduce the risk of fire, electric shock, or injury during use and installation.

Cord Replacement Prohibition

The external flexible cable or cord of this luminaire is not replaceable.

Damaged Cord Consequence

If the cord is damaged, the entire luminaire must be destroyed.

Preparation and Assembly Steps

Pre-Assembly Part Verification

Before assembly, ensure all parts match the package and hardware lists.

Handling Missing or Damaged Parts

Do not attempt assembly if any parts are missing or damaged; contact support.

Bulb Specification Note

Use specified bulb types and wattages (max 25W incandescent, 13W CFL, 5W LED) for safe operation.

Assembly Step 1

Connect lamp body tubes, pull cord, attach body to base, screw in bulb, and attach shade.

Assembly Step 2

Place the assembled light on a level surface to check for stability.