Safco TASK MASTER - User Manual

Registered U.S. Patent D381,823
Check all parts against Parts List before beginning
assembly. Allow all parts to warm to room tempera-
ture prior to assembly.
Install a (A) Glide into each of the legs of the (B)
Base. Press firmly into place. Be sure the glide is
inserted completely into leg for proper stability.
Insert the (C) Cylinder into the base, tapered end
down. Secure the cylinder by applying a little down-
ward pressure (CAUTION: When applying downward
pressure, avoid plastic button at top of cylinder, as
pressure will release pneumatic lift)
Slide (D) Foot Ring on to cylinder (ring side up),
position at desired height. Turn knob to secure. Place
(E) Dust Cover over exposed cylinder.
Install the (F) Seat Assembly by aligning the hole on
the underside with the shaft of the cylinder; push down
firmly on seat.
Insert the stem of the (G) Back Assembly into the slot
at the back of the seat. Use a screwdriver to depress
the push button at the bottom of the stem and slide
until the stem goes all the way through the slot and
sticks out the other side about 2". It may be necessary
to rotate the lever at the back of seat assembly
clockwise so stem will slide all the way through the
slot. Rotate the lever counterclockwise to lock the
stem.
Make the final chair adjustments following the instruc-
tions on the reverse side.
1
2
4
6
5
3
G
F
E
C
D
B
A
TOOLS REQUIRED: Standard Screwdriver
PRODUCT WARRANTY CARD is available online at: www.safcoproducts.com
TASK MASTER
®
INDUSTRIAL CHAIR
(19” - 27” Range)
ASAS
ASAS
AS
SEMBLSEMBL
SEMBLSEMBL
SEMBL
Y Y
Y Y
Y
INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONS
New Hope, MN 55428
Visit us on the web:
www.safcoproducts.com
an LDI Company
5113
Glide 5 5110-25
Base 1 5105-54BL
Cylinder 1 5110-11
Foot Ring 1 5110-06
Dust Cover (3 pc set) 1 5110-14
Seat Assembly 1 5113-01BL
Back Assembly 1 5113-02BL
A
B
C
D
E
F
G
Q
Q
Q
Q
Q
Q
Q
PART NO.
PARTS LISTPARTS LIST
PARTS LISTPARTS LIST
PARTS LIST
CODE
DESCRIPTION
QTY.
5113-37MP: 1 of 6;
Rev. 4: 11/06 (8000.03)
For questions or concerns, please call the Safco Consumer Hot Line 1-800-664-0042
available Monday-Friday 8:00 AM to 4:30 PM (Central Time) (English-speaking operators)

Summary

Assembly Instructions

Parts List

Lists all components required for chair assembly, including code, description, quantity, and part number.

Assembly Steps

Step-by-step guide for assembling the chair, from attaching glides to the base to securing the back assembly.

Chair Adjustment Instructions

Height Range Adjustment

Details how to adjust seat height for optimal posture, arm angle, and leg position.

Back Height Adjustment

Explains adjusting the backrest for lumbar support and spinal disc pressure relief.

Back Angle Adjustment

Describes how to adjust the backrest angle for tasks requiring leaning forward.

Seat Angle Adjustment

Guides on setting the seat tilt for forward leaning tasks and comfortable positioning.

Maintenance and Safety

Maintenance Instructions

Provides guidance on maintaining the pneumatic lift and cleaning chair components.

General Safety Instructions

Outlines crucial safety precautions for using the chair, including assembly and stability.

Safco TASK MASTER Specifications

General

Brand	Safco
Model	TASK MASTER
Category	Indoor Furnishing
Language	English