Need help?Do you have a question about the Safety 1st Crosstown and is the answer not in the manual?
General| Brand | Safety 1st |
|---|---|
| Model | Crosstown |
| Recline Positions | 3 |
| Side Impact Protection | Yes |
| Washable Cover | Yes |
| Weight | 18.5 lbs |
| Type | Convertible |
| Harness Type | 5-Point Harness |
| Installation | LATCH or Vehicle Seat Belt |
| Category | Convertible Car Seat |
Overview of rear-facing, forward-facing, and booster seat modes.
The four main tasks to get started with the car seat.
Diagram showing all major components of the car seat.
Close-up view of the harness, buckle, and related parts.
Instructions for body pillow and harness cover use.
Guidance on selecting the appropriate mode based on child's size.
Loosening, unbuckling, and preparing the harness.
Head and harness strap positioning for rear-facing.
Head and harness strap positioning for forward-facing.
How to adjust the headrest and harness height.
Steps for changing the buckle slot.
Specific adjustments for smaller infants.
Using the body pillow for infant harness setup.
Explanation of the 4 recline positions and usage.
Procedures for storing and removing the UAS belt.
Steps to attach the UAS belt to vehicle anchor bars.
How to ensure the vehicle belt locks correctly for installation.
Information on switchable, automatic, and emergency retractors.
Warning against using certain types of vehicle belts.
How to store and adjust the tether strap.
Connecting the tether strap to the vehicle's anchor point.
Initial steps for rear-facing installation using vehicle belt.
Step-by-step instructions for routing the belt.
Verifying belt tightness and recline level.
Securing the child and rechecking the recline angle.
Steps to prepare and route the UAS belt.
Connecting UAS hooks to vehicle anchor points.
Verifying UAS belt tightness and security.
Guidelines for forward-facing use.
Pre-install checks and initial tether attachment.
Checking belt compatibility and routing.
Securing the vehicle belt and tether.
Preparing and threading the UAS belt.
Connecting tether and UAS hooks to vehicle anchors.
Securing the vehicle belt and tether.
Buckling the harness and tightening it securely.
Ensuring correct chest clip placement and harness snugness.
Steps for safely removing the child from the seat.
Weight, height, and usage rules for booster mode.
Detailed instructions for removing the harness components.
Correct positioning of head and shoulder belt.
Correct positioning of the lap belt.
Guide to correctly position vehicle belts on the child.
Instructions for washing the seat pad and accessories.
Steps to properly reinstall the seat pad.
Steps for installing buckle and threading harness straps.
Guidance on using the car seat on airplanes.
Specific steps for rear-facing and forward-facing aircraft installs.
Criteria for replacing the car seat after a crash.
Information on expiration and critical safety practices.
Advice on optimal seating positions for children.
How to register the product and stay informed of safety issues.
Information on warranty coverage and claims.
Solutions for sticky buckles and harness twisting.
List of available parts and how to order them.
Contact information for consumer care.
To Next Page