Safety 1st Grow and Go 3-in-1 User Manual

Grow and Go 3-in-1
rear-facing child restraint
5-40 lb (2.3-18 kg) and 19-40 in. (48-101.6 cm)
forward-facing child restraint
22-65 lb (10.1-29 kg) and 29-49 in. (73.6-125 cm)
and at least 2 years old
booster seat
40-100 lb (18.1-45.4 kg) and 43-52 in.
(110.1-132.1 cm) and at least
4 years old
KEEP INSTRUCTIONS FOR
FUTURE USE.
Read all instructions
before using this
child restraint.
™
4358-6653
4.10.15
Failure to follow the warnings on the labels and in the
instruction manual can result in serious injury or death
to your child.
To see installation videos, scan the QR Code
or visit www.safety1st.com
©2015 Dorel Juvenile.
4358-6653 Grow and Go 3 in 1.indd 1-24358-6653 Grow and Go 3 in 1.indd 1-2 4/15/15 8:47 AM4/15/15 8:47 AM

Safety 1st Grow and Go 3-in-1 Specifications

General

Product Type	Convertible Car Seat
Weight Range	5-100 lbs
Height Range	19-52 inches
Orientation	Rear-Facing, Forward-Facing, Belt-Positioning Booster
Harness Type	5-point harness
Recline Positions	3
Machine Washable Cover	Yes
Rear-facing weight capacity	5-40 lbs
Forward-facing weight capacity	22-65 lbs
Booster weight capacity	40-100 lbs
Buckle Positions	Adjustable
Side Impact Protection	Yes
LATCH equipped	Yes
Cup Holders	2
Installation Method	LATCH or Vehicle Seat Belt
Height Limit (Rear-Facing)	40 inches
Height Limit (Forward-Facing)	29-52 inches
Headrest Positions	10

Summary

Product Overview and Preparation

Parts of the Child Restraint

Identify key components and features of the child restraint system.

Prepare Child Restraint for Fit

Steps to loosen harness, unbuckle, and position child for initial fit check.

Child Fit and Harness Adjustment

Child Fit Guidelines

Understand rear and forward-facing fit criteria based on child's size and shoulder height.

Headrest and Harness Height Adjustment

Adjust headrest and harness height for optimal fit and safety.

Securing the Child Safely

Harness Routing and Securing

Correctly thread harness straps and secure the child by buckling and tightening.

Recline Positions and Harness Tightness

Set recline positions and check harness tightness to ensure child safety.

Installation Procedures

Rear Facing Installation

Guide to installing the child restraint in rear-facing mode using LATCH or vehicle belts.

Forward Facing Installation

Requirements and procedures for forward-facing installation, including tether use.

Booster Seat Installation

Instructions for converting to booster seat and installing with lap/shoulder belt.

Critical Safety and Usage Information

Child Restraint Use and Vehicle Seating

Crucial guidelines on restraint use, weight/height limits, and safe vehicle seating positions.

Maintenance and Support

Storing Harness System

Procedures for storing the harness system when converting to a booster seat.

Troubleshooting and Support

Solutions for common issues and contact information for Dorel Juvenile Group.

Warranty and Parts

Details on the product warranty, limitations, and how to order replacement parts.